Products > Roll-Up Door > Miscellaneous Hardware
Hardware

 
  • Zinc plated finish
  • These standard fasteners hold all hardware items to panels
  • Use the rib neck carriage bolt with the MSS lock and keeper assembly and hinge installations
  • Rib neck carriage bolt allows tamper proof installation with a rivet look and eliminates the nut being installed externally for security
 
Specifications
part no. weight (lbs.) pop. code description cross reference
992-00001 .010 A 1/4"-20 hex nut T #80352-420, 120300
993-00721 .003 A 1/4" lock washer T #80322-225, W #10-1046-1, 120500
991-00085 .003 A 1/4" hex bolt 1.75" T #80105-416
991-00400 .040 A 1/4" -20 x 1.25" step bolt (.75" head) T #80015-1610, 120250
991-00401 .040 A 1/4" -20 x 1.50" step bolt (.75" head) T #80015-1610
991-00630 .045 A 1/4" -20 x 3.00" step bolt (.75" head) -
991-00631 .060 A 1/4" -20 x 3.50" step bolt (.75" head) -
991-00632 .090 A 1/4" -20 x 4.50" step bolt (.75" head) -
991-00700 .030 A 1/4" -20 x 1.75" elevator bolt (1.00" head) -
991-00402 .020 A 1/4"-20 x 1.25" rib neck carriage bolt (.56" head) -
994-00106 .005 A 1/8"-2.5" cotter pin -
992-01100 .010 A 1/4"-20 kep nut - zinc W #10-1022-1
992-00701 .010 A 1/4"-20 kep nut - stainless steel W #10-1022-6

< back    

 

  

1800 East Keating Avenue • Muskegon, Michigan 49442
1-231-777-2537 • 1-800-333-7890 • FAX: 1-231-773-5500

All website design, text, graphics, the selection and arrangement thereof, are Copyrights of Fleet Engineers, Inc.
Any use of images, content, and other portions of this website, including reproduction, modification,
distribution or republication, without prior written consent is strictly prohibited.
© 1963-2011, Fleet Engineers, Inc., All Rights Reserved.

This website was last updated April 2, 2012